Vehicle Parking Management Loop Vehicle Detector For Vehicle Access Control

1.Easy use and install
2.Low price
3.Comply with parking system

keywords: loop detector wire, double loop detector, vehicle loop detector, radiation detector, loop, alarm lamp, inductive loop detector, gate loop detector, single loop detector, digital loop detector

Specifications

1. Supply voltage AC: 220V, 110V, 24V, 12V

2. Supply voltage DC: 24V, 12V

3. Sensitivity: Adjustable in 3 increments (high .medium. low)

4. Operating temperature: -20°C to +65°C

5. Storage temperature: -40°C to +85°C

6. Frequency range: 20 kHz to 170 kHz

7. Reaction time: 100ms

8. Loop inductance: Ideal:80?H to 300?H (incl. conn. wiring): max: 50?H to500?H

9. Loop connection: <5m optimal

10. Loop connection wiring: Maximum length 200 meters,twisted at least 20 times per meter

11. Dimensions: 78x40x108 mm (L x W x H)

12. Net Weight: 300g

13.Frequency:the frequency can be altered by means of DIP6-Switch.

u to eliminate interference of two neighboring wire loops

u to eliminate interference of two neighboring loop detectors

u to eliminate interference of two neighboring distribution cables (loop detectors)

Description:

Loop detectors are used wherever vehicles have to be detected. Like monitoring and safe

guarding access ways to counting vehicles. The output signal can be used for controlling door

and gate drive mechanisms, operating barriers, controlling traffic light systems in car parks or

activating card dispensers in car parks

Application:

Parking Guidance System

Car Locating System

Parking Management system

Tragically

Attention:

When using more than 2 Detectors, please select different frequencies ,and screened cables for Detector or

connecting cables widely separated

Sensitivity:

In order to calibrate on site the wire loop to the loop detector, the sensitivity can be adjusted on the front of

the housing by means of a three-stage sliding switch.

Ø High: high sensitivity (e.g. also bicycles can be detected)

Ø Medium: medium sensitivity (e.g. for automobiles)

Ø Low: low sensitivity (preferably Lorries will be detected)

Ensure that the loop is NOT activated when making these adjustments.