Keyhole design waterproof AC110V / 220V Automatic Vehicle Barrier
Gate For Highway Toll System
We are a professional car parking barrier gate manufacturer ,established in 2010 with over 11 years R&D experience. There is 2000 sqm workshop for 4 zones. 100 experienced and skilled
workers enabled us to have 100pcs daily output.
1. Specifications
| Arm Type | Straight Arm: Max 6 meters, Size 45×100mm and 45*80 mm aluminum
alloy Fence Arm: Two or three fence arm, Max 6 meters, aluminum alloy |
| Size | 320*280*935 mm |
| Rating Power | 120W |
| Rating Voltage | AC 220V/110V±10%, 50/60HZ |
| G.W | 50 KG |
| Spring And Bearing | Heat Treatment: more durable, more than 5 million times through
operation testing |
| Remote Control Distance | ≥30m |
| Material | Galvanized plate or Cold roll plate, 2mm thickness sheet 3 years without rust, shedding and fading |
| Relative humidity | ≥90％ |
| Advantages | 1. Professional manufacture with 8 years 2. OEM/ODM service 3. Short lead time 4. The overall design, independent mould 5. Quality gurantee, more durable 6. Better service from professional team |
2. Common malfunctions and solutions
1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.
2. The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.
3. The distance of the charge capacity of the remote controller is
enough or not
4. There is no reaction when pressing the remote controller
buttons,
a. Please check whether the power is supplied to the barrier gate
or not,
b. Please check whether the fuse is burnt out or not
c. Please check whether the code both in the remote controller and
the controller board are accordant or not
Any question about toll gate price, quality, shipment, please don’t
hesitate to contact us.
Contact:
